book collections email follower instructable user
Picture of CNC Controller - Complete Rebuild.

When I first built my CNC router, I used a TB6560 driver board and 2 x ATX power supplies (2 * 12 = 24 Volts) to power it, but the board died and the power supplies gave me grief, so I replaced them all..

The old box was too big, and when I replaced the power supply and driver board it had lots of large and ugly holes in it so I rebuilt the box as well.

Step 1: CNC Controller Rebuild

This instructable is in 3 parts:

1) Make the box

2) Install the Components

3) Wire it up, set the DIP switches and test.

I love using junk & recycled stuff to do projects, so a lot of what I used for the re-build is recycled.

Swansong1 year ago

Thanks for sharing :)

Bverysharp (author)  Swansong1 year ago

Thanks! I hope it helps!