book collections email follower instructable user

Step 9: ATTACHING THE TOUCH BUTTONS AND MPU6050

Picture of ATTACHING THE TOUCH BUTTONS AND MPU6050
IMG_20190406_161511_HDR.jpg
IMG_20190406_162341.jpg
IMG_20190406_163620.jpg
IMG_20190406_164053.jpg

1. A rubber based adhesive is used.

2. The adhesive is applied to both surfaces.

3. Making sure all the soldering points are facing the open side of the case, place the modules in their assigned places as shown in the pictures.

4. Keep the module and casing gently pressed together for at least 2 min after adhering them together.