book collections email follower instructable user

Step 8: Base

I did not have a block big enough to cut the base so it is done in two blocks.

the overall process is (you can follow the pictures too):

  • draw the head contour, the inner contour and the lower end contour on the base
  • cut the inner part with a band saw
  • shape with a router
  • cut (as top and bottom are not parallel)
  • glue
  • a little pass on the planner
  • cut outside with band saw
  • carve and sand to final shape
  • drill a hole on the lower back end of the base for the power cord
  • et voila!