book collections email follower instructable user

Step 9: Optional: Add a Taper to Your Legs

Picture of Optional: Add a Taper to Your Legs
step 2 taper.jpg
step 3 taper.jpg
taper 2.gif

I used some scrap to make a tapering jig on the table saw. I's very simple and you can see it used in the video and the above pictures. You can also use a jigsaw, handsaw, or any other capable tool you feel comfortable with to add this taper.

1. Measure 1/2" on the bottom edge of your leg parts "H" and "J." Mark this location on the outward facing 1" side.

2. Draw a line from this mark to the one you made in the previous step.

3. Use whatever tapering setup you chose to cut that taper along your mark on all of your "H" and "J" parts.