book collections email follower instructable user

Step 2: Materials Needed

Picture of Materials Needed

And here are the materials you will need:

Headband x2: https://www.amazon.de/gp/product/B074NWCL4K/ref=pp...

Elastic Fabric/ Band (1m): https://www.amazon.de/gp/product/B07CZXLQCW/ref=pp...

Silicone Rubber Mix (500g) for the ball to take some hits in case it is dropped during passes: https://www.amazon.de/gp/product/B00HB63DYG/ref=pp...

Fabric Gloves x2: https://www.amazon.de/gp/product/B07LCCM6YX/ref=pp...

Kebab Stick x6 and at least 12cm long.

2mm Plywood sheet (900x500mm) for lasercutting the headpieces

1mm Carboard sheet (300x300mm) for lasercutting the slapper hands

And for personalisation purposes, we recommend also getting some paints to colour code the headbands and their flames!